HOW TO MOUNT AN NTFS PARTITION MANUALLY IF IT DOESN’T MOUNT AUTOMATICALLY
1) Make sure you’re using the latest Microsoft NTFS for Mac by Paragon Software.
2) Connect the drive containing the NTFS partition, and make sure the partition is not mounted. You can open Disk Utility, select the required partition on the left, and click “Unmount” on the menu bar above.
3) Open the Terminal utility (Application -> Utilities -> Terminal) and perform the following command to create a mountpoint:
sudo mkdir /Volumes/ntfs
Please note that if you need to mount several NTFS volumes simultaneously, you’ll need to create the corresponding number of mountpoints.
(for instance
sudo mkdir /Volumes/ntfs
sudo mkdir /Volumes/ntfs1
sudo mkdir /Volumes/Bootcamp
etc)
A new mounpoint must be created after each system restart.
4) Run the following command:
diskutil list
and note the NTFS partition’s (listed as Windows_NTFS/Miscrosoft Basic Data) Identifier or use Disk Utility for the same purpose:
Disk Identifier : diskXsY
where X and Y are natural numbers. We will need them later.
5) Run the following command to mount it:
sudo /Library/Filesystems/ufsd_NTFS.fs/Contents/Resources/mount_ufsd_NTFS /dev/diskXsY /Volumes/ntfs
where diskXsY – the NTFS partition’s identifier from the previous step
/Volumes/ntfs – the mountpoint from Step 3
(for instance)
sudo /Library/Filesystems/ufsd_NTFS.fs/Contents/Resources/mount_ufsd_NTFS /dev/disk0s3 /Volumes/ntfs
Please be sure to:
If the mount issues persist:
Please contact Paragon Software support Team.
Be sure to save screenshots of the Terminal commands’ output as well as attach new verbose logs:
https://kb.paragon-software.com/article/8138
and attach those to your request.
General, HowTos: Mac OS X, Know how: Mac OS X, NTFS for Mac OS X
Tags: bootcamp, howto, mac, manual, mount, ntfs